Tag Archive: robot

KEY FEATURES

Not quite your traditional boogie monster, this fun DIY tissue box can add some nefarious flair to any room. It’s made with a durable MDF (Medium Density Fiberboard) dominant material and features a main compartment for your tissues, as well as multiple expressions, so you can get just the right amount of villainy on your desk, coffee table, or wherever else you find yourself needing a hanky.

• Build your own creative tissue holder
• Adjust the arms for multiple poses/configurations
• Polish & paint the surface to match any room’s decor
• Place anywhere thanks to durable MDF material

PRODUCT SPECS

Details

• Material: MDF (Medium Density Fiberboard) dominant
• Weight: 2lbs

Includes

• Laser cut pieces
• Sand paper
• Nuts and bolts

KEY FEATURES

The PiCar-V is an open source robot learning kit on Raspberry Pi, and this deal even includes your own Raspberry Pi 3 board. Equipped with a wide-angle USB webcam, this car is powerful with three new circuit boards, but less complicated than other cars thanks to its simpler wiring and provided Python code. Go for a drive through your PC, mobile phone, or tablet – this car works with anything.

• Use included Python code to get the car up & running
• Transmit images & video in real-time w/ the USB webcam
• Control the car & camera’s direction in real time w/ the included code
• Program & debug the car w/ Dragit

PRODUCT SPECS

Details & Requirements

• Supply input voltage: 7V-12V (by 2 18650 batteries)
• Dimensions: 10.6″ x 6.7″ x 4.3″
• Quad Core 1.2 GHz Broadcom BCM2837 64-bit CPU’
• 1GB RAM
• BCM43438 wireless LAN and Bluetooth Low Energy (BLE) on board
• 40-pin extended GPIO
• 4 USB 2.0 ports
• 4 Pole stereo output and composite video port
• Full size HDMI
• CSI camera port for connecting a Raspberry Pi camera
• DSI display port for connecting a Raspberry Pi touchscreen display
• Micro SD port for loading your operating system and storing data
• Upgraded switched Micro USB power source up to 2.5A

Includes

• Raspberry Pi 3 board
• Robot HATS
• PCA9685 PWM driver
• TB6612 motor driver
• 2 18650 battery holders
• 2 DC gear motors
• 3 SunFounder SF0180 servos
• 120º wide-angle USB camera
• 2 rear wheels
• 2 front wheels
• USB WiFi adapter
• Ribbon
• Cross screwdriver
• Cross socket wrench
• M2.5/M4 small wrench
• M2/M3 small wrench
• Several wires
• Assorted screws, nuts, and standoffs

KEY FEATURES

You can’t be in two places at once, but with Zubot you can get pretty darn close. Zubot is the HD Wi-Fi robot you can control from your phone wherever you are. With 720p HD recording capabilities and two-way communication, Zubot can act as a mobile security camera, or act as your surrogate if you can’t be somewhere. Just think of it as your personal assistant and security guard.

• Control the Zubot from wherever you are using your phone
• Communicate w/ anyone through the Zubot thanks to two-way communication
• Take pictures or videos w/ remote camera control & share them to social media instantly
• Surveil your property at night thanks to IR night vision
• Charge automatically w/ the auto-docking & charging feature

PRODUCT SPECS

Details & Requirements

• Camera resolution: 720p HD
• Field of view: 86º diagonal
• Network connectivity: 2.4GHz Wi-Fi
• Standby time: 9 hours
• Active time: 2 hours
• Charge time: up to 9 hours
• Battery capacity: 4200mAh
• Adapter: 5V/1.5A

Compatibility

• iOS 8.0 or later
• Android 4.1.3 or later

Includes

• Zubot
• Charging station
• AC adapter
• User manual

KEY FEATURES

PiSmart is an intelligent platform based on Raspberry Pi designed by SunFounder, integrating Speech to Text (STT), Text to Speech (TTS), and servo and motor control. It includes a 5-channel, 10-bit ADC, and utilizes the 8-channel digital built into the Raspberry Pi to make DIY programming easier, and enabling intelligent human interaction. PiSmart has been built into this fun smart robot kit, allowing you to build a car, program it to follow a line, avoid obstacles, and respond to your voice.

• Includes Raspberry Pi
• Based on the PiSmart platform
• PiSmart integrates speech recognition of STT, TTS, & servo and motor control
• Works for line following & obstacle avoidance w/ the ultrasonic & line follower modules
• Many pin headers allow you to install more sensors for function extension
• Supports graphical programming w/ Scratch for easy debugging

PRODUCT SPECS

Includes

• Raspberry Pi 3
• M3x8 screw
• M3x10 screw
• M3x12 screw
• M2.5×12 screw
• M3x24 screw
• M3 nut
• Universal wheel
• Driven wheel
• Gear reducer
• 2S Li-Po battery
• PiSmart top PCB
• PiSmart bottom PCB
• Ultrasonic obstacle avoidance module
• Line follower module
• M2.5×10 bi-pass copper standoff
• M2.5×11+6 copper standoff
• M3x40+6 copper standoff
• 150mm HX2.54 3-pin jumper wire
• 150mm HX2.54 4-pin jumper wire
• 150mm DC5.5-2.1 specialized power cord
• 40mm FFC 0.5 40-pin reverse connecting line
• USB charger for Li-Po battery
• 3M velcro tape

KEY FEATURES

SunFounder’s newest robotics learning kit goes by the name of Sloth! This fun, simple robot kits is compatible with the included SunFounder Nano board or an Arduino Nano board and is equipped with two legs that you can program to walk, kick, or even dance. Outfitted with a HC-SR04 ultrasonic ranging module, it can even detect and avoid obstacles intelligently. Even if you’ve never had any experience with programming, this simple kit comes with a visual programming language, allowing any DIY-er to start from scratch.

• Build a variety of different models w/ the included pieces & program each to do different things
• Program the Sloth to walk on two legs or change directions based on gesture detection
• Learn how to code faster & easier than ever w/ the visual programming language software
• Get creative w/ your robot & make learning to code more fun than ever

PRODUCT SPECS

Compatibility

• SunFounder Nano board (included)
• Arduino Nano board

Includes

• 4 Tower Pro servos 9g
• Ultrasonic module
• 4 M3x30 bi-pass aluminum standoffs
• 4 M3x6+6 single-pass aluminum standoffs
• 12 M3x8 round head Phillips screws
• 12 M3x6 round head Phillips screws
• 16 M3 nuts
• 12 M2x8 round head Phillips screws
• 12 M2 nuts
• 8 M1.2×4 self-tapping screws
• 4 M1.4×8 round head Phillips screws
• 4 M1.4 nuts
• SunFounder Nano board
• SunFounder servo control board
• 2×18650 battery holder
• Heat shrink tubing (30cm)
• Riband (40CM)
• 2 M3x6 hollow rivets
• 2 Ø3x8x4 band edge bearings
• Mini USB cable
• 4-pin anti-reverse cable
• Phillips screw driver